5
Up to 6 mm
EXTENDING INSIDE PART OF THE CYLINDER
(if needed)
If the door thickness is not suitable to the cylinder of the device, inside part of the
cylinder may be extended up to 6 mm by 2 mm steps.
To extend the cylinder’s inside part, follow the instructions below:
- Open “handle screw” and remove the handle by pulling.
- Remove the batteries.
- Rotate “hex screw” to counter-clock wise by using the hex key out of the box till the
motorized part is disassembled from the cylinder.
- Add 2 mm metal extending parts as needed.
- Assemble cylinder and motorized part and rotate hex screw to clock wise direction.
- Install the batteries and check the device if it is working properly or not.
26 10
32
26 10
38
1.STEP
Remove
existing
cylinder.
2. STEP
Install
smart
lock and
tighten
the
screw
.
That’s
it!
INSTALLATION OF MOTORIZED CYLINDER
