6
2.
FEATURES OF THE DEVICE
2.1.
General Features
Ÿ
You can use your alarm system with a remote control or password.
Ÿ
Your alarm panel can be used with DESi brand wired and wireless detectors.
Ÿ
In case of emergency, you can give a panic alarm with remote control.
Ÿ
You can set the delay time after you have activated your alarm, and you can set the buzzer
to beep during the startup and standby period.
Ÿ
You can increase or decrease the levels of arming or disarming warning sounds, also you
can
activate the system silently with the remote control any time.
Ÿ
Your device notifies power failures with leds.
Ÿ
Your device has a programmable relay output.
Ÿ
If you wish, the
tamper
detection can give an alarm
even if the
system
is
disarmed
.
Ÿ
Your
device
has a output for a wired smoke detector.
Ÿ
Partial Arming
:
You
can disable
some of the detectors.
Addition to normal arming, t
he
system offers 2 different partial arming options.
(see 4.10 Programming the Zones)
Ÿ
3 Level Delayed Area
:
When you want to use your system with a password, one or more
detectors
can
detect
while
you are going to the keypad to enter the
password. In this case,
you can programme your detectors to avoid wrong alarms.
(see 4.10
Programming the Zones)
Ÿ
24 Hours Active Area
:
For fire detectors (or for a different reason), you can have some
areas which need to
be in
control even when the alarm is
disarmed
.
(see 4.10 Programming
the
Zones)
Ÿ
Pani
c Area
:
You can activate the voice call before the siren rings. (see 4.10 Programming
the Fields)
Ÿ
Auto Arming: Your device is equipped with automatic arming option to prevent accidental
disarming
or against forgetting to arm. (see 4.5)
Ÿ
Reporting: Your device can report the detectors that caused the alarm, the password
(user)
disarm
ed
the alarm, or the total number of remote control
lers
and passwords in the system.
Ÿ
Voice Call Features (Except WKS model): Your system has a telephone connection.
T
he
device can call up to 6 different phone numbers and leave a 10-second voice message or it
can
be monitored every second by the alarm monitoring center.
Also
you can arm/disarm or
control the relay output of your device by accessing it remotely
.
2.2. Technicial Specifications
Operating Voltage: 220 V AC
Battery: 12 Volt DC (4 Ah)
Wireless Device Frequency:: 433.92 Mhz
Wireless Zone Count:32
Remote Control Memory: 8
Password Structure:
1 admin + 7 user + 1
remote 1 panic alarm passwords
Wired Zone Count
: 6 (
programmable
)
Maximum Number of Wired Detectors
: 10
(The
total current consumption cannot exceed 500 mA.)
Other Connection Features
:
Programmable
relay, smoke detector output, outdoor siren
output, external keypad connection, PSTN
(landline) and GSM caller (depending on the
model.)
