In these Screen dumps it shows each step except the
File command
. In steps 4-7 the
corresponding screens have been combined. In
Step 4 and 5
each has it’s own “Point Selection”
screen and once you select for Point 1 it will flow into a second screen for Point 2. As well, in
Step 6
and 7
after you hit “Save Registration” it will pop up with the “Chart Registration yes/no box” before
you can proceed. Once clicked “No” Chart Registration will be dismissed automatically.
Then you go into DiveBase SeaFloor and select
File—Load Map File
, point yourself to the correct
folder and load the map file you have just created. After the “map” file has been selected it will show
up as a Chart Overlay.
Rotating an image for north alignment prior to registration
There are a few other key notes to take into factor when registering an image. If it is north and south
aligned then you will register it as such, but if it is not you have a few options. On of your options is
to first rotate the picture using a photo editing software, or you can just reference any point north and
