4.
Conduct initial noise test to determine system noise
Preparing
1.
Charge the batteries
Deploying
1.
Deploy surface transducers
2.
Enter baseline positions in software
3.
Check and enter visibility
4.
Activate and deploy the mobile station
5.
Conduct a noise test to determine ambient (underwater) noise
Operation
1.
Start operation
2.
Adjust the display
3.
Record annotations
4.
Retrieve the system
Reporting
1.
Replay the survey record
2.
Save images of the survey record
3.
Create the report document
4.
Make the survey record portable
Pilot™ System Components
The specific components included with the Pilot™ system will vary depending upon your
configuration.
Typical components include:
1.
1 Mobile Station (A TLT, VLT, or DS mobile station)
2.
An STM surface station
3.
Three surface station sonar transducers on 15m or 30m cables
4.
Software: DiveBase and Chart Registration
5.
This manual and the hardware manuals (for all stations)
Not Included (you must provide):
1.
A computer running Windows XP with a minimum of 256MB of RAM.
