Desco Scarab APR-2000-SCS User Manual Download Page 20

Page: 20 / 79

3651 WALNUT AVENUE, CHINO CA 91710 • PHONE (909) 664-9980 •

APR-Rework.com

Page

TB-10006 REV December 2018

Employee Owned

Profile Data Table

• 1 System Performance information

• Displays 8 user-defined profile markers (performance)

• Provides temperature and ramp rate data

Changing Profile Marker location - Method 1

• Left click the desired profile marker. The cursor will change

to double arrows. Drag & drop to the desired time.

Changing Profile Marker location - Method 2

• Right click the profile marker. The time adjust dialog box will

appear. Use the up and down arrows to select the desired

time. Click"ok" to enter the desired time.

Repeatability verification:

•If external thermocouple plots were saved as part of a previous run.

•Left click “Real Time” data box on the appropriate external TC1,2,3 to

enable / disable a comparison plot for the next run.

All manuals and user guides at all-guides.com

Summary of Contents for Scarab APR-2000-SCS
















































































Search results

Summary of Contents for Scarab APR-2000-SCS

Reviews:

Related manuals for Scarab APR-2000-SCS

Brands by name

Popular brands

Desco Scarab APR-2000-SCS, User Manual

Search results

Summary of Contents for Scarab APR-2000-SCS

Reviews:

Related manuals for Scarab APR-2000-SCS

Brands by name

Popular brands