TB-3090
Page 7 of 8
Calibration
Digital Static Field Meter
Routine calibration is not required. There are no user
serviceable parts. Contact
Desco Customer Service
should the Digital Static Field Meter exhibit any
abnormal behavior. Any unauthorized service will void
the warranty and result in additional repair charges.
Specifications
Digital Static Field Meter
Performance
Measurement Range
0 to ±19.99 kV / inch
Measurement Accuracy
Better than ±5% of reading,
±2 counts
Measurement Stability
±10 counts
Front Panel Meter
Voltage Display
3-1/2 digit LED display
Sampling Rate
3 readings per second
Features
Ranging System
LED distance indicator;
aligned targets indicate 1"
Range
LED distance indicator
Rotary Zero Knob
Sets the zero-reference point
Low Battery Indicator
An LCD icon indicates when
the battery is low
Hold Switch
Retains the LCD display
reading when depressed
General
Dimensions
0.9" H x 2.8" W x 4.9"L
(24 mm x 70 mm x 126 mm)
Weight
4.9 oz. (140 g) with battery
Operating Conditions
Temperature
50 to 86ºF (10 to 30ºC)
Relative Humidity
To 80%, non-condensing
Altitude
To 2000 m
Certifications
CE
Power Requirements
Power
One (1) 9-volt alkaline battery
Operating Time
Greater than 50 hours,
with a new battery at 21ºC
continuous
Air Ionization Test Kit
Conductive plate
Assembly
Aluminum bracket, bare
aluminum plate and teflon
spacers isolate plate from
bracket
Voltage Output
1/10,000 of measured voltage
Conductive plate Area
2.95" W x 1.18" L
(7.5 x 3.0 cm)
Conductive plate
Assembly Weight
2.4 oz. (68 g)
Charger Dimensions
1.1" H x 2.6" W x 4.5" L
(2.8 x 6.6 x 11.4 cm)
Charger Weight
5 oz. (140 g) with battery
Charger Power
Requirements
One 9-volt alkaline battery
Charger Output (using
Digital Static Field
Meter with conductive
plate)
1.1 kV minimum for ± voltage
Certifications
CE
Test Equipment Depot - 800.517.8431 -
5 Commonwealth Ave,
Woburn,
MA 01801
