Desay M8, User Manual, Page: 8 / 19

Document: DS-M8--OPM-1.0M Page 8 of 19 © DESAY INTELLIGENT CO. LTD.
T +752 2617 333 led@desay.com WWW.DESAYOPTO.COM
2.3 Hanging Bracket (HB)
（
hanging bracket
） （
double hanging bracket
）
The hanging bracket (HB) is a lifting device specially designed to lift one or several panels that have
been locked together, and thus form a column or a stack. When screens are rigged or flown from a
truss, the HB will form the connection between the truss and the column of the screen. Subsequently
the HB holds the complete weight of this column. It is important to keep the HB in good condition and
check it before use.
Mechanism is basically made of the locking rod inside the centre door of the panel. To lock the panel
to the HB, you need to insert the kingpin through the hole in the HB, and then turn the locking rod
(inside the centre door of the panel), so that the kingpin can slide into the locking position on the HB.
When using the hanging brackets, the operator should make sure that the kingpin of the
panel is locked onto the hanging bracket.
Specification of the SHB (size: W x H x D)
Dimensions (hanging bracket including connection piece ): 799.5 x 100 x 50mm
Weight ( hanging bracket): 3.8 Kg
Specification of the DHB (size: W x H x D)
Dimensions (double hanging bracket including connection piece): 1599 x 100 x50mm
Weight (double hanging bracket): 8.5Kg