![background image](http://html.mh-extra.com/html/desa/vsgf28nv/vsgf28nv_owners-operation-and-installation-manual_2486134012.webp)
12
103281
INSTALLING
Continued
2. Install a properly grounded, 120 volt three-prong electrical outlet at fireplace
location if an outlet is not there. If possible, locate outlet so cabinet mantel will
cover it when installed (see Figure 8).
3. Install gas piping to fireplace location. This installation includes an approved
flexible gas line (if allowed by local codes) after the manual shutoff valve. The
flexible gas line must be the last item installed on the gas piping. See Installing
Gas Piping to Fireplace Location, page 16.
4. Place hearth base accessory against wall at installation location. Cut an access
hole in hearth top to run flexible gas line to fireplace (see Figure 8). Make sure
to locate access hole so cabinet mantel will cover it when installed.
Note:
You
can secure base to floor using wood screws. Countersink screw heads and
putty over.
Figure 8 - Placing Hearth Base Accessory Against Wall
5. Route flexible gas line through access hole in hearth base.
6. Center cabinet mantel on hearth base (see Figure 9). Make sure mantel is flush
against wall.
Figure 9 - Installing Cabinet Mantel
,,,,,
,,,,,
QQQQQ
QQQQQ
¢¢¢¢¢
¢¢¢¢¢
Electrical Outlet
Hearth Base
Flexible Gas Line
Gas Line Access
Hole
,,,,,
,,,,,
QQQQQ
QQQQQ
¢¢¢¢¢
¢¢¢¢¢
,,,,
,,,,
,,,,
,,,,
,,,,
QQQQ
QQQQ
QQQQ
QQQQ
QQQQ
¢¢¢¢
¢¢¢¢
¢¢¢¢
¢¢¢¢
¢¢¢¢
Cabinet Mantel
Summary of Contents for VSGF28NV
Page 42: ...42 103281 NOTES ...
Page 43: ...43 103281 NOTES ...