background image

     
 
 
 
 
 
 
 
                                           

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
DESA INTERNATIONAL 

2701 INDUSTRIAL DRIVE 

 

 

 

 

 

 

 

                                P/N 111099-01 

P.O. BOX 90024  

 

 

 

 

 

 

 

 

                                      REV A 

BOWLING GREEN, KY 42101-9004 

 

 

 

 

 

 

                                         11/02 

www.desatech.com

 

SAVE THIS BOOK 

This book is valuable.  In addition to instructing you on
how to install and maintain your appliance, it also
contains information that will enable you to obtain
replacement parts or accessory items when needed.
Keep it with your other important papers. 

This fireplace is approved for use as a wood burning fireplace or for use
with a vented gas log approved to ANS Z21.60, Z21.84 or RGA 2-72
standards or for use with a vent-free gas log heater approved to ANS
Z21.11.2 standard.  A DESA hood must be installed when using a vent-
free gas log heater (see Accessories, p. 12). 

WARNING:  Always leave glass doors fully opened or fully closed when operating this fireplace. 

    

 

            S42

 

 

42”  textured white refractory brick

 

                   S42H

 

 

42”  textured white herringbone refractory brick

                       S42R

 

 

42”  textured red refractory brick 

                    S42RH

 

 

42”  textured red herringbone refractory brick

                       VS42(1)

 

 

42”  smooth white refractory brick 

             VS42H(1)

 

 

42”  smooth white herringbone refractory brick

RESIDENTIAL AND OUTDOOR WOODBURNING FIREPLACE 

INSTALLATION INSTRUCTIONS 

 

 

 

 

OMNI-Test Laboratories, Inc. 

ALL DIMENSIONS IN THIS MANUAL ARE IN 
 INCHES UNLESS OTHERWISE SPECIFIED

 

Summary of Contents for VS42 Series















Reviews: