![background image](http://html1.mh-extra.com/html/desa/vmh2800tnb/vmh2800tnb_owners-operation-and-installation-manual_2486114006.webp)
6
101935
WARNING ICON
G 001
WARNING
Always have burner shield and screen in place before operating
heater. This prevents excessive temperatures on heater surfaces.
Failure to position the parts in accordance with these diagrams or
failure to use only parts specifically approved with this heater may
result in property damage or personal injury.
Burner Shield
Screen
Front Panel
Deflector
ASSEMBLY
Continued
Log
Retaining
Brackets
Log
Truss-
Head
Screw
Brass
Front
Trim
Screw
Screw
Figure 4 - Assembling Heater
Heater Cabinet
Nut
Attaching Brass Front Trim to Front Panel
1. Locate brass front trim in brass trim package.
2. Slide the head of two truss-head screws from hardware packet into each end of
brass front trim (see Figure 5).
3. Line up screws with holes in front panel (see Figure 4). Insert screws in holes.
Attach nuts from inside of front panel. Tighten with wrench.
Truss-Head Screw
Nut
Front Panel
Figure 5 - Attaching Brass Front Trim to Front Panel
Brass Front
Trim