![background image](http://html1.mh-extra.com/html/desa/vm36e/vm36e_owners-operation-and-installation-manual_2486104014.webp)
www.desatech.com
108796-01L
14
0.5"
0.5"
Figure 22 - Pan and Ember Material
Clearances
Grate
Burner Pan
Pan and Ember
Material
InstallatIon
Continued
LOG PLACEMENT FOR M36E, M36EP,
VME36 AND VM36EP MODELS
1. Place small front right log (log 1) on right front
of grate as shown in Figure 23.
2. Place large back log (log 2) onto grate mak-
ing sure notches rest over grate as shown
in Figure 23.
3. Place log 3 into notch on log 2, resting the
front end on top of log 1 (see Figure 24).
4. Place the upper end of log 4 into the notch on
log 2 as shown in Figure 24. Rest the lower
end of log 4 onto the middle grate finger as
shown in Figure 25.
5. Place the upper end of log 5 into notch on the
left of log 2 (see Figure 25). Rest the lower end
of log 5 on the grate as shown in Figure 26.
6. Insert the lower end of log 6 between the first two
grate fingers as shown in Figure 26 and position
the upper end of log 6 into the notched area on
the front of log 2 as shown in Figure 26.
As an option to enhance the look of the hearth,
you may place the lava rock provided around the
front and sides of the burner.
Figure 23 - Installing Logs 1 and 2
Log 1
Log
Notch
Figure 24 - Installing Logs 3 and 4
Log 3
Log 4
Log
Log 1
Notches
NOTICE: Do not put lava rock
inside the burner pan or around
the air mixer fitting. Placing lava
rock inside the burner pan or
blocking the openings of the pro
-
pane/LP air-mixer could cause
performance problems.
Figure 25 - Installing Logs 5 and 6
Log 5
Log 6
Log 4
Notch
Notch
Figure 26 - Logs Installed for M36E,
M36EP, VME36 and VM36EP Models