![background image](http://html1.mh-extra.com/html/desa/pscivfc-series/pscivfc-series_owners-operation-and-installation-manual_2486401004.webp)
107304-01D
For more information, visit www.desatech.com
For more information, visit www.desatech.com
4
LOCATION AND SPACE REQUIREMENTS
Determine the safest and most efficient location for your cast iron
stove. Make sure that rafters and wall studs are not in the way of the
venting system. Choose a location where the heat output is not
affected by drafts, air conditioning ducts, windows, or doors. Figure
2 shows some common locations. Read all venting information in this
manual. Be aware of all restrictions and precautions before deciding
the exact location for your stove.
When deciding the location of your stove, follow these rules:
1.
Do not connect this stove and burner system to a chimney flue
serving a separate solid-fuel burning fireplace or appliance.
2.
Due to high temperatures, do not locate this stove in high traf-
fic areas or near furniture or draperies.
PRE-INSTALLATION
PREPARATION
On Wall with
Horizontal Termination
On Wall with Vertical
Termination Through Ceiling
Corner Installation
Figure 2 - Common Stove Locations
WARNING: A qualified service person must in-
stall stove and burner system. Follow all local codes.
CAUTION: This stove creates warm air currents.
These currents move heat to wall surfaces next to
stove. Installing stove next to vinyl or cloth wall
coverings or operating stove where impurities (such
as, but not limited to, tobacco smoke, aromatic
candles, cleaning fluids, oil or kerosene lamps, etc.)
in the air exist, may discolor walls or cause odors.
LOCAL CODES
Install and use stove and burner system with care. Follow all local
codes. In the absence to local codes, use the current National Fuel
Gas Code ANSI Z223.1/NFPA 54* (USA) or the current CSA-
B149[.1 or .2] Installation Codes (Canada).
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
PRODUCT FEATURES
OPERATION
This cast iron stove with burner system is clean burning and vents
easily through outside walls or vertically using outside air for
combustion. Heat is generated by both realistic flames and glowing
embers. When used without the blower accessory, the stove with
burner system requires no electricity making it ideal for emergency
backup heat.
PIEZO IGNITOR
This burner system has a piezo ignitor. This system requires no
matches, batteries, or other sources to light burner system.
GLOSSARY OF TERMS
Chase
- A box-like enclosure to protect venting from the elements
when the venting run is on the outside of a structure.
Mastic
- A pliable sealant for use around the vent terminal.
Snorkel Termination
- A box that raises the horizontal termination
above ground level clearances.
Vent Termination
- Mounted on an outside wall or roof to separate
the inlet and outlet of the vent system and protect it from weather.
Vinyl Siding Standoff
- A metal box that separates the vent cap from
vinyl siding.
Wall Thimble/Firestop
- A metal plate used to secure the vent pipe
when it passes through a wall or ceiling.
LOCAL CODES
PRODUCT FEATURES
GLOSSARY OF TERMS
PRE-INSTALLATION PREPARATION
Location and Space Requirements