background image

Staples

We recommend that you only use PowerFast or Swingline heavy-duty staples.
These staples are available in six lengths. PowerFast or Swingline heavy-duty
staples can be found where you purchased your staple gun.

Part
Number

Length

36804 (800-4)

1/4"

36805 (800-5)

5/16"

36806 (800-6)

3/8"

36808 (800-8)

1/2"

36810 (800-9LT)

9/16"

LIMITED ONE YEAR WARRANTY

DESA Industries warrants this product for a period of one year from date of
purchase against original defects in materials or workmanship. If this product
fails to perform for either of those reasons, DESA Industries will repair or
replace with an equivalent product at no charge within 45 days of receipt of
the defective product.

This warranty gives you specific legal rights. You may also have other rights,
which vary from state to state.

To obtain the benefits of this warranty if the product fails due to defects in
materials or workmanship, contact:

DESA Industries of Canada, Inc.
Unit #4
2220 Argentia Road
Mississauga, Ontario
L5N2K7

Swingline

 

 is a registered trademark of ACCO World Corporation.

Summary of Contents for PowerFast 34310

















Reviews:

Related manuals for PowerFast 34310