3
104655
For more information, visit www.desatech.com
Figure 1 - Portable Forced Air Heater
PRODUCT
IDENTIFICATION
ASSEMBLY
These models are furnished with wheels and
a rear handle. Some models are furnished
with a front handle also. Wheels, handle(s),
and the mounting hardware are found in the
shipping carton.
Tools Needed
• Medium Phillips Screwdriver
• 3/8" Open or Adjustable Wrench
• Hammer
1.
Slide axle through wheel support
frame. Install wheels on axle.
IMPORTANT:
When installing wheels,
point extended hub of wheels toward
wheel support frame (see Figure 2).
2.
Place cap nuts on axle ends. Gently tap
with hammer to secure.
3.
Place heater on wheel support frame.
Make sure hot air outlet end (front) of
heater is over wheels. Line up holes on
fuel tank flange with holes on wheel
support frame.
4.
Place rear handle (and front handle if
provided) on top of fuel tank flange.
Insert screws through handle(s), fuel
tank flange, and wheel support frame.
Attach nut finger tight after each screw
is inserted.
5.
After all screws are inserted, tighten
nuts firmly.
Lower Shell
Hot Air Outlet
Fan Guard
Fuel Tank
Side Cover
Fuel Cap
Upper Shell
Power Cord
Ignition Control Assembly
(assembly on inside of
side cover)
Thermostat Knob
Figure 2 - Wheel and Handle Assembly
Front
Handle
Rear
Handle
Wheel Support Frame
Wheel
Hot Air
Outlet
Fuel
Tank
Flange
Screw
Nut
Cap Nut
Axle
Air Inlet
Extended Hub
• PRODUCT IDENTIFICATION
• ASSEMBLY
