Desa ARL B50G Owner'S Manual Download Page 7

7

102016

STORING,

TRANSPORTING,

OR SHIPPING

Note: 

If shipping, transport companies require fuel tanks to be empty.

1. Drain fuel tank.

Note: 

Some models have drain plug on underside of fuel tank. If so, remove

drain plug to drain all fuel. If heater does not have drain plug, drain fuel
through fuel cap opening. Be sure all fuel is removed.

2. Replace drain plug if provided.
3. If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank,

stir, and drain again. This will prevent excess debris from clogging filters
during future use.

4. Replace fuel cap or drain plug. Properly dispose of old and dirty fuel. Check

with local automotive service stations that recycle oil.

5. If storing, store heater in dry place. Make sure storage place is free of dust and

corrosive fumes.

IMPORTANT:

 Do not store kerosene over summer months for use during next

heating season. Using old fuel could damage heater.

WARNING

!

PREVENTATIVE

MAINTENANCE

SCHEDULE

Never service heater while it is plugged in, operating, or
hot. Severe burns and electrical shock can occur.

Item

How Often

How To

Fuel tank

Flush every 150-200 hours

See Storing, Transporting,
   or Shipping,
 above.

  of operation or as needed.

Air output and

Replace every 500 hours of

See Air Output, Air Intake,

lint filters

  operation or once a year.

   and Lint Filters, page 9.

Air intake

Wash and dry with soap and

See Air Output, Air Intake,

filter

  water every 500 hours of op-

  and Lint Filters, page 9.

  eration or replace as needed.

Fuel filter

Clean twice a heating season

See Fuel Filter, page 10.

   or replace as needed.

Spark plug

Clean and regap every 600

See Spark Plug, pages 10

  hours operation or replace

  and 11.

  as needed.

Fan blades

Clean each season or as needed. See Fan, page 9 .

Motor

Not required/permanently lubricated

Summary of Contents for ARL B50G

















Reviews: