background image

13

102016

Note:

 Use only original replacement parts. This will protect your warranty cover-

age for parts replaced under warranty.

Parts Under Warranty

Contact authorized dealers of this product. If they can’t supply original replacement
part(s), call DESA International’s Technical Service Dept. at 1-800-323-5190.

When calling DESA International, have ready

• your name
• your address
• model number of your heater
• how heater was malfunctioning
• purchase date

Usually, we will ask you to return the defective part to the factory.

Parts Not Under Warranty

Contact authorized dealers of this product. If they can’t supply original replacement
part(s), call DESA International’s Parts Dept. at 1-800-972-7879 for information.

When calling DESA International, have ready

• model number of your heater
• the replacement part number

REPLACEMENT

PARTS

ACCESSORIES

Purchase accessories and parts
from your nearest dealer or
service center. If they can not
supply these accessories or
parts, either contact your nearest
Parts Central or DESA Interna-
tional for information. Parts
Centrals are listed in the
Authorized Service Center
booklet supplied with heater.

DESA International
P.O. Box 90004
Bowling Green, KY
42102-9004
1-800-972-7879
Parts Department

A 008

FLAME-OUT
CONTROL/PHOTOCELL
TESTER - HA1170

For all models. Special tool
used to test the flame-out
control and photocell.

AIR GAUGE
KIT - HA1180

For all models. Special
tool to check pump pres-
sure.

HEAVY DUTY
WHEELS AND
HANDLE KIT - HA1202

For heavy duty applications.
Makes your heater even
more portable and convenient.

STANDARD WHEELS AND
HANDLE KIT - HA1206

Makes heater even more
portable and convenient.
Easy to assemble.

THERMOSTAT
KIT - HA1210

For all models. Keeps
your building at the
temperature you select
day and night. Helps
economize on fuel.

Summary of Contents for ARL B50G

















Reviews: