manualshive.com logo in svg

Desa 35,000 BTU/Hr Models, Owner'S Manual

Share
Download
Desa 35,000 BTU/Hr Models Owner'S Manual Download Page 10

10

102437

11. Tighten spark plug with spark plug

mounting nut.

12. Release hex-body of spark plug

from vise.

13. Replace burner strap onto combus-

tion chamber.

14. Attach spark plug wire to spark

plug.

15. Attach fuel and air line hoses to

nozzle assembly.

16. Replace fan (see page 9).
17. Replace fan guard and upper shell.

45

°

Burner
Strap

Figure 12- Spark Plug Rotation

Figure 13 - Removing Air and Fuel Line Hoses

Fuel Line Hose

Nozzle
Assembly

Combustion
Chamber

Air Line Hose

Nozzle
Assembly

Burner
Strap

Figure 14 - Removing Nozzle Assembly

Nozzle

Nozzle
Face

Nozzle
Adapter

Air Line
Fitting

Fuel Line
Fitting

Nozzle
Seal

Figure 15 - Nozzle and Nozzle Adapter

Nozzle

1. Remove upper shell (see page 9).
2. Remove fan (see page 9).
3. Remove fuel and air line hoses

from nozzle assembly.

4. Turn nozzle assembly 1/4 turn to

left and pull toward motor to
remove.

5. Place plastic hex-body into vise

and lightly tighten.

6. Carefully remove nozzle from the

nozzle adapter using 5/8" socket
wrench.

7. Blow compressed air through face

of nozzle. This will free any dirt in
nozzle area.

8. Inspect nozzle seal for damage.
9. Replace nozzle into nozzle adapter

until nozzle seats. Tighten 1/3 turn
more using 5/8" socket wrench
(40-45 inch-pounds).

10. Attach nozzle assembly to burner

strap.

11. Attach fuel and airline hoses to

nozzle assembly.

12. Replace fan (see page 9).
13. Replace fan guard and upper shell.

Summary of Contents for 35,000 BTU/Hr Models

















Reviews:

No comments

Brands by name

Popular brands

Load more brands