www.desatech.com
118419-01E
7
aSSemBly
Continued
7. Assemble wheel axle into front holes of
legs (see Figure 7).
8. Secure front legs to tank with two bolts
(C) (see Figure 8).
9. Tighten bolts from step 4 securing legs to
rear cross support.
10. Set heater down to floor on wheel and rear
legs.
Figure 7 - Installing Wheel and Axle
Wheel
Leg
Figure 8 - Attaching Legs to Tank
Bolt (C)
Figure 9 - Front and Rear Handle
Assembly
Front
Handle
Rear
Handle
Bolt (D)
Figure 10 - Handle and Leg Assembly
Leg
Handle Assembly
Nut (E)
11. Slide rear handle onto each end of front
handle. Insert bolts (D) into holes (2 per
side) (see Figure 9).
12. Lift handle assembly over heater. Align
and guide bolts into holes in leg.
13. Secure assembly with nuts (E) (see
Figure 10).
14. Tighten entire assembly with tools.
