DERMAVIT Diamond Shield IE Crystal, Instruction Manual

Page: 50 / 60

Diamond Shield IE Crystal
Instruction Manual
page 50
Running a chip card
Chip cards are available as accessories containing preprogrammed frequency
sequences. These diamond chip cards as well as the individually programmed
master chip cards can be played as follows:
Insert the chipcard into the chipcard slot of the device.
Select the menu item
Chip card and press the OK -button.
A submenu appears, which displays the contents of the
chipcard.
The entire sequence(s) and/or sub-programs of
Chip card
can be applied similarly as it is described in the chapter
„Standard“ menu , page 47.
For running the entire sequence of the selected program,
press the
START -button.
For running single sub-programs of the sequence, enter
the submenu of the sequence by pressing the
OK -button.
The subprograms of this sequence are displayed. Then
select the desired subprogram and run it by pressing the
START -button.