13
Operating Instructions PHOS 40 outdoor | V1.0 | 15. 10. 2015
Derksen Lichttechnik GmbH
1. The waterproof connection tube (IP 68 , max. 5 bar) is factory mounted on the
projector.
2. Unscrew the connection tube to push out the terminal block.
3. Connect the mains cable according to the label to the terminal block
4. Close the connection tube. Observe the tightening torque of the screw: 2.5 Nm!
5. Slide the nuts on the cable clamp gaskets.
6. Screw the cable clamp gaskets . Please observe the tightening torque in order to
achieve an optimal tightness: 4 Nm.
CLEANING, REPAIR
• Clean the device only from the outside with a soft cloth. Do not use strong detergents
or solvents such as alcohol or benzine.
• Use only optical cleaning cloths to clean the front lens.
• Repairs and cleaning of the inside may only be performed by a qualified service
technician.
• Devices can be returned for service or repair directly to Derksen Lichttechnik GmbH.
Transport and ship the device in its original packaging. If this is not available
anymore, you can use a cardboard box with adequate padding on the inside.
• Only use genuine spare parts from Derksen Lichttechnik
