11
Operating Instructions PHOS 40 outdoor | V1.0 | 15. 10. 2015
Derksen Lichttechnik GmbH
Attention! Loosen the locking screw first before you tilt the projector head!
Step 5:
Align the projector
head and fasten the
locking screw using
the 4 mm Allen key.
Installation:
Loosen the 3 screws
on the pedestal of the
projector and remove
the mounting plate.
Attach the mounting
plate with 4 screws Ø 4
mm to a floor, wall or
ceiling. Be sure to use
the appropriate
mounting accessories
for your type of
surface, such as
anchors, screws etc.
