Cleaning and disposal
PHOS LT
13 / 20
5.6. Locking the projector head
1.
Screw the casing onto the projector head.
6. Cleaning
5.5. Aligning the mo�f
1.
Loosen the knurled screw un�l the gobo case can be
rotated.
2.
Rotate the gobo case un�l the mo�f has been aligned
as desired.
3.
Tighten the knurled screw.
7. Disposal
7.1 Disposal of packaging
Please do not dispose of packaging waste together with household waste. It should be disposed of separately. There are
established facili�es in your area for returning waste (e.g. recycling or waste paper bins). Further informa�on on how to
dispose of packaging properly and on the op�ons available for returning packaging waste can be obtained from your city or
municipal council.
•
Clean the projector surface using a damp cloth and commercial cleaning agents. The surface can be damaged by sol-
vents in the cleaning agents.
•
The preferred way of cleaning the heat sink is with compressed air. Cooling is not affected by a light build-up of dust.
You should clean the projector every 6 months in loca�ons where a lot of dust is created (e.g. industrial plants). A
cleaning interval of 1-2 years is suitable for a normal environment.
•
Use lens cleaning cloths if you no�ce any dirt on the projector’s op�cal lenses.
WARNING! Danger of electric shock!
An electric shock can cause serious injury or death.
▶
Switch off the mains supply to the projector before cleaning it.
