Instruction Manual PHOS 20 / LAP 20 LED Projector
Version 1.3, English
Tuesday, 19 April 2011
___________________________________________________________________________
|
DERKSEN USA
|
www.derksen.com
Page 4 of 10
W
1. Installation
What you should note before installation:
1. The projector can be set up on a flat, level surface without a permanent fixture or it can
be fixed to a wall or ceiling.
2. A permanent fixture should only be made by qualified personnel.
3. The machine weighs 2.8 kg so ensure the wall, ceiling or the construction intended to
hold it is stable enough to support a weight of at least 12 kg.
4. The national safety committee have ruled that extra safety measures must be taken for
overhead constructions so to this end use a safety cable.
5. The power cable and plug should never be damaged in any way.
6. The power cable must be disconnected when mounting the machine onto a wall or
ceiling outlet. This work should only be carried out by a qualified electrician.
Diagram 2: Assembly or removal of the mounting plate
mounting plate
base (rotated view)
