Shenzhen Dericam Technology Co.,LTD
M501W User Manual
www.dericam.net
Copyright @ Shenzhen Dericam Technology Co., Limited
15
5.11 Mail Service Settings
Fig5.12
Mail Service Settings
Go to option “
Mail Service Settings
“
1------Sender Email address to be used as a sender
2------Receiver 1 to 4 Email address to be used as a receiver, up to four receivers
3------SMTP Server SMTP Server of the Sender mailbox
3------SMTP Port SMTP port no. of the mail server of the sender mailbox
4------SMTP User ID Account of the sender email address
4------SMTP Password The password of the sender email address
5----- Report Internet IP Notification of WAN IP address change information
Complete the settings with your email account, and click set to take effect.
1) Sender and Receiver can be the same email address. It means that you can use one email as both sender and
receiver.
2) For Enterprise mail SMTP user, you need to enter full email address on the column “SMTP user”. Take SMTP
server “
mail.dericam.com
” for example. you might need to enter
on the column of “SMTP
User”.
3) Please click Submit first before making Test.
Trouble Shooting----The email failed to send emails or snapshots
1. Check the mail service settings, and make sure all of them are correct and try it again.
2. Check if the sender email is enabled with SMTP server.
3. Check the mailbox should not be enabled SSL or TSL encryption.
Note
