Derby cycle Pedelec Groove 2.0, User Manual, Page: 2 / 24

Inhalt
Introduction 3
1 Safety 4
1.1 General 4
1.2 Statutory requirements 4
1.2.1 Requirements for the rider 4
1.3 Battery 5
1.4 Charger 6
1.5 Motor 7
1.6 Adjustments/maintenance/repair 7
1.7 Transportation of the Pedelec 7
1.7.1 The Pedelec and your car 7
1.7.2 The Pedelec on trains 7
1.7.3 The Pedelec on aeroplanes 8
1.8 Cleaning 8
1.8.1 Battery 8
1.8.2 Motor 8
1.8.3 Display 8
1.8.4 Control unit 8
1.8.5 Charger 9
1.9 Riding with luggage 9
1.9.1 Panniers 9
1.9.2 Trailers 9
2 Warranty regulations 10
2.1 Warranty periods 10
2.2 Warranty conditions 10
2.2.1 Conditions 10
2.2.2 Exclusions 10
2.2.3 Wear parts 10
2.2.4 Intended use 10
3 Components of the Pedelec 11
4 First steps 12
4.1 Checking the tightening torques 12
4.2 Fitting the pedals 12
4.3 Adjusting the saddle height 12
4.3.1 Clamping bolt 12
4.3.2 Quick-release device 12
5 Quick start 13
6 Battery 14
6.1 Charging the battery 14
6.1.1 Removing the battery 14
6.1.2 Charging the battery 15
6.1.3 Installing the battery 16
6.2 Battery information system 16
6.2.1 Checking the charge state 16
6.3 Battery management 16
6.4 Warranty and service life 16
6.5 Storage 17
6.6 Shipping 17
6.7 Disposal 17
7 Charger 18
8 Display and control unit 18
8.1 Switching on and of 19
8.1.1 Switching on 19
8.1.2 Switching of 19
8.2 Assist mode 19
8.3 Pushing assistance 19
8.4 VEL (speed),
ODO (total kilometres)
and DST (trip distance)
20
8.4.1 Resetting the trip distance (DST) 20
8.5 Adjusting the back-lighting 20
8.6 Battery charge indicator 20
9 The motor 20
9.1 Operation 20
9.2 Range 21
9.3 Riding your Pedelec eiciently 21
10 Troubleshooting 22
10.1 Code indication on the display 22
11 Removing and itting the ront wheel 23
12 Technical data 23