30
S
TANDARD
DIAMETER
I
NSPECTING
THE
TIMING
SYSTEM
COMPONENTS
- Check that the guide shoe and the tensioner shoe are not
worn out.
- Ensure that the camshaft drive pulley, the chain assembly
and the pinion are not worn.
- Replace any worn components. If the chain, pinion or
pulley are worn, replace the whole assembly.
- Removing the central screw with the O-ring and the chain-
tensioner spring. Ensure the unidirectional mechanism is not
worn.
- Check the condition of the tensioner spring.
- If any worn components are found, replace the whole
assembly.
ENGINE
EE
- CYLINDER ASSY. AND TIMING SYSTEM
ENGINE
- CYLINDER ASSY. AND TIMING SYSTEM
SPECIFICATIONS
Standrad diameter A:
Standrad diameter B:
Ø 32,015 ÷ 32,025 mm
DESC. / QUANTITY
Ø 16,0 ÷ 16,018 mm
Standrad diameter C:
Ø 11,0 ÷ 11,018 mm
I
NSPECTING
THE
TIMING
SYSTEM
COMPONENTS
