2.4
Residual risks
DEPURECO recommends complying with the instructions, procedures and recommendations in this manual and with
the safety standards in force. DEPURECO also recommends using suitable personal protective equipment as well as
the protection devices integrated in the vacuum.
The residual risks analysed on the vacuum and/or its components can be:
Electrical risks during maintenance on live parts
Pursuant to Italian Legislative Decree 81/08 – articles from 80 to 87 – it is prohibited to operate on live parts,
notwithstanding the exceptions set forth by said Legislative Decree.
Risk of improper use in presence of liquid, explosive and flammable substances
The vacuum must not be used in environments containing liquid substances or liquids that can evaporate at room
temperature, flammable powders and gas.
Risks related to operation in humid environments
Comply with the limitations indicated in this manual, in section 1
7
. “Allowed environmental conditions”.
Risk of crushing the upper limbs.
A safety pictogram on the vacuum warns about this hazard.
Risks of misinterpretation of safety pictograms
With reference to risk analysis and identification, DEPURECO has installed hazard labels on the vacuum, in
compliance with the standard concerning graphic symbols.
The user must immediately replace any safety plate made illegible due to wear or damage.
Attention!
It is strictly prohibited to remove the safety plates from the vacuum and/or its components and
packaging.
DEPURECO shall not be held liable for the vacuum's safety in the event of failure to comply with this
prohibition.
2.5
Applied directives
The following Directives apply to the vacuum described in this manual:
2006/42/CE Machinery Directive
Reference standards, including their binding requirements, are managed through the DEPURECO Quality and
Environmental Management System.
