Deprag 400373 B, Operating Instruction Booklet

Page: 16 / 40

16
6.4. Insert or Change Inserting Tool
IMPORTANT
Use perfect inserting tool (e.g. bits) with DIN 3126 – E6.3 (1/4“) external
hexagon end only.
The screwdriver is equipped with a quick change chuck.
Mount or change the inserting tool as follows:
1. Disconnect screwdriver from air/power supply.
2. If necessary, unscrew spring sleeve (Optional Equipment) or other components (left-
hand thread).
3. Pull the sleeve 351890 forward, the inserting tool can now be inserted or removed.
IMPORTANT
Push the inserting tool into the hex of the spindle until it locks.
Illustration 4 - Insert or Change Inserting Tool