Deprag 397075 A, Operating Instruction Booklet

Page: 19 / 40

19
Assembly:
Use the DEPRAG Grease 807293 (100-g tube) to grease the
ball bearing, needle bearing and gearing parts prior to
reassembly.
a. Clean rotor.
b. Press the ball bearings into the two bearing covers.
c. Press the shaft-side bearing cover with the ball bearing on the rotor.
d. Insert the new vanes into the rotor.
e. Put the rotor cylinder over the rotor.
After assembly the bearing covers shouldn’t have any axial
gap. The rotor must turn freely.
f. Press air-connecting side bearing cover with the ball bearing on the
rotor.
Attention:
Preassemble the motor housing 3988561 by hand and do not
tighten excessively.
For assembly proceed logically in reverse order with reference to disassem-
bly!
Special Repair Tools (Optional Equipment)
N
AME
U
SAGE
P
ART
N
O
.
Fixing device for rotor cylinder 460762
Arbor to disassemble bearing cover with
groove ball bearing 462329
Press-in device to press the intermediate pinion 328139
into the gear support
461224
Assembly arbor to assemble circlip 800248 onto spindle 461292
Chucking jaws for motor housing 461498
Spanner AF 19 for motor housing 800408
Plier for clutch bearing 398861 4612961