Deprag 347-228-31LV, Operating Instruction Booklet

Page: 8 / 40

8
1.7. Observe Environmental Regulations
When working on or with the equipment, it is imperative to
observe all requirements in regards to waste-disposal and
proper recycling.
Especially during installation, repair or maintenance, water
damaging agents such as
·
lubricating grease and oil
·
hydraulic fluid
·
cooling agents
·
solvent-containing cleaning agents
must not leak into the ground or into the sewage system!
Such materials must be stored, transported, contained and
recycled in suitable containers.
2 Designated Equipment Use
These stationary screwdrivers can be used in conjunction with a
reduction gear only.
They are designed to reduce hole centre distances
resp. to increase the torque value.
Screwdriver Spindles are constructed for the stationary use in
·
Lever Operated Single Spindle Screwdriving Stations
·
Construction Units
·
Multi-Spindle Screwdriving Stations
·
Robot End-Of-Arm Tooling
·
X-Y-Z Screw-Assembly Stations
These Spindles assemble screws to torque and measure that torque more
accurately than any subsequent testing method.