Deprag 347-228-31L, Operating Instruction Booklet

Page: 17 / 36

17
Assembly:
Use the DEPRAG Grease 807293 (100-g tube) to grease the
ball bearing, needle bearing and gearing parts prior to
reassembly.
a. Clean rotor.
b. Press the ball bearings into the two bearing covers.
c. Press the shaft-side bearing cover with the ball bearing on the rotor.
d. Insert the new vanes into the rotor.
e. Put the rotor cylinder over the rotor.
After assembly the bearing covers shouldn’t have any axial
gap. The rotor must turn freely.
f. Press air-connecting side bearing cover with the ball bearing on the rotor.
For remaining assembly proceed logically in reverse order with reference to
disassembly!
Special Repair Tools (Optional Equipment)
N
AME
P
ART
N
O
.
Fixing device (for rotor cylinder) 460474
Assembly arbor (to assemble circlip 800248 onto spindle
351888) 461292
Chucking jaws (for motor housing 384449) 462048
Pin wrench (for valve housing 384469) 462122
Spanner AF 24 (for motor h clutch bearing) 800406
Spanner AF 8 (for function control line) 800399
Spanner AF 13 (for nipple 3236293) 800404