© Henri DEPAEPE SAS - France
12
6.
Useful informations
6.1
Contents of Package:
2 x mounting screws and 2 x Anchors
1 x Handset hook
1 x A/C Adaptor
1 x Battery
1 x charger
1 x Handset Unit, 1 x Battery cover
6.2
Installing the Battery
Never dispose battery in fires, otherwise it will explode.
Never replace the batteries in potentially explosive environments, for e.g. close to inflammable
liquids/ gases.
ONLY use approved batteries and chargers from the vendor or operator.
Do not disassemble, customize or short circuit the battery
6.3
Using the Charger
Each handset is charged through the use of a handset charger. The charger is a compact desktop unit
designed to charge and automatically maintains the correct battery charge levels and voltage. The charger
Handset is powered by AC supply from 110-240VAC that supplies 5.5VDC at 600mA. When charging the
battery for the first time, it is necessary to leave the handset in the charger for at least 10 hours before the
battery is fully charged and the handset ready for use.
For correct charging, ensure that the room temperature is between 0°C and 25°C (32°F and 77°F). Do not
place the handset in direct sunlight. The battery has a built-in heat sensor which will stop charging if the
battery temperature is too high.
6.4
Handset features
Wideband Audio (G.722)
2’’ TFT display with graphical user interface 176 x 220 pixel 262K color
Well-proven graphical MMI with wallpapers
Polyphonic ringtones
LED status indication
Phonebook: 200 central and 100 local entries
GAP and CAT-iq compliant
Headset connector (3.5mm)
SW upgrade over-the-air
Wideband two-way speaker phone mode
Vibrator
Battery Talk time : >18 hours - Standby time : >200 hours
HAC earpiece
(*) All trademarks and brand names mentioned herein are the property of their respective
owners. The listed brand names and model designations are intended only to show the
compatibility of Partner RX DECT Handset with existing PBX.
