© Henri DEPAEPE SAS - France
11
4.8
Coverage warning
When the feature
”Audio settings → Coverage warning”
is enabled (On), an audible indication is given in
the earpiece when the user is close to maximum range.
4.9
Charger warning
When the feature
Audio settings → Charger warning”
is enabled (On), an audible indication will be given to
confirm that the handset is correctly connected to the charger.
5.
Connectivity menu
5.1
Registration with Partner TX antennas system
The handset can be registered by selecting menu
“Connectivity → Register”
. The user will be prompted for
an Access code (Base registration PIN) before the registration procedure is started. The Access code PIN is
default “0000” and cannot be changed via the handset. The Access code PIN can only be change via the web
interface on the base.
5.2
Deregistration with Partner TX antennas system
The handset can be de-registered by selecting menu
“Connectivity → Deregister”
. You will be prompted for
a PIN code (Base de-registration PIN), the PIN code is default “0000” and cannot be changed via the handset.
Then the warning message
“Delete registration?”
will be displayed and you have to accept by pressing soft
key
“Yes”
, or soft key
“No”
to cancel the operation.
5.3
Registration with other PBX integrated DECT System
(Alcatel, Aastra, Ericsson *)
Partner RX handset can be registered on the following system:
ALCATEL OmniPCX* Office - Enterprise - 4400 (OXO/OXE/4400)
AASTRA* DECT over IP *
AASTRA Nexspan*
SME VOIP (for SIP PBX like Asterisk*, 3CX* …)
Press the menu key
, select the connectivity menu
.
Go to
“Connectivity → Select PBX”
, you will be prompted for a PIN code, the default PIN code is “0000”.
Then select a PBX system from the list displayed :
The handset will reboot automatically…
After reboot, go to
“Connectivity → Register”
, you will be prompted again for a PIN
code (“0000” by default). Handset will register on the system.
