Depaepe Telecom HD 2000 series, User Manual, Page: 14 / 52

HD2000 IP User Manual
Copyright © 2015
SAS HENRI DEPAEPE
Page 14 of 52
7.2.
Make a Phone call (keypad models only)
7.2.1. Completing Calls
There are two ways to complete a call:

DIAL: To make a phone call.
• Take Handset off-hook
• The phone will have a dial tone.
• Enter the phone number
• Waiting for 4 seconds or press the # key
Note:
1) The value ‘no key entry time out’ by default is 4 seconds, you can change it.
2) You can also modify the dial plan for send a call immediately.

REDIAL
:
To redial the last dialed phone number
.
• Take Handset off-hook
• press Bis button.
7.2.2. Quick IP Call Mode
Direct IP calling allows two phones to talk to each other in an ad hoc fashion without a SIP proxy.
VoIP calls can be made between two phones if:
• Both phones have public IP addresses, or
• Both phones are on a same LAN/VPN using private or public IP addresses, or
• Both phones can be connected through a router using public or private IP addresses (with
necessary port forwarding or DMZ)
The HD2000IP also supports Quick IP call mode. This enables the phone to make direct IP-calls,
using only the last few digits (last octet) of the target phone’s IP-number.
This is possible only if both phones are in under the same LAN/VPN. This simulates a PBX
function using the CMSA/CD without a SIP server. Controlled static IP usage is recommended.
For example:
192.168.0.2 calling 192.168.0.3 -- dial *473 follow by #
192.168.0.2 calling 192.168.0.23 -- dial *4723 follow by #
192.168.0.2 calling 192.168.0.123 -- dial *47123 follow by #
192.168.0.2: dial *473 and *4703 and *47003 results in the same call -- call 192.168.0.3
NOTE: If you have a SIP Server configured, a Direct IP-IP still works. If you are using STUN,
the Direct IPIP call will also use STUN. Configure the “Use Random Port” to “NO” when
completing Direct IP calls.