Denzel 26302, User Manual

Page: 3 / 28

3
ELECTRIC IMPACT DRILL
EN
PROPER USAGE AND GENERAL INFORMATION
Electric drilling handheld machine with impact function (hereinafter referred to as "drill", "machine", "tool")
is designed for drilling into different constructional materials, including metal, wood and its derivatives, plastics,
etc., drilling holes in building materials and structures, such as brick and masonry, lightweight concrete, various
types of tiles using drills with cylindrical or hexagonal shanks. It can also be used as a drive for various accessories
- brushes, grinding plates, cutters, etc., having a cylindrical or hex shank.
The machine is designed for usage at aт environment temperature from 0 °С to 40 °С, relative humidity not more
than 80% and absence of direct exposure of atmospheric condensation and excessive air dustiness.
The machine is suitable only for private use and must be used in intermittent duty not more than 20 hours per
month. It is recommended to use on-loading not more than a nominal, during 10-15 minutes and then to have
a break for 20-30 minutes. This usage mode enables to complete domestic tasks effectively and prevents the tool
from a premature coming out of order.
This manual contains the information and the requirements necessary and sufficient for a sure, effective
and secure use of the tool.
Due to ongoing activities in order to improve the tool the manufacture reserves the right to make minor changes
in its construction, not mentioned in this manual and not worsening its consumer and operational properties,
effective and secure use.
COMPLETENESS OF SET
The set contains:
1. Electric impact drill
1 pc.
2. Key for chuck 1 pc.
3. Side handle 1 pc.
4. Drilling depth gauge 1 pc.
5. Set of spare carbon brushes 1 pc.
6. Instruction manual with warranty card 1 pc.
SPECIFICATIONS
Тable 1
Parameter
Value
26302 26304 26307
Power consumption, W 550 650 750
Adjustment of rotation speed + + +
Number of gears 1 1 1
No load speed, rpm 0-2900 0-3000 0-3000
The range of diameters of shanks of tooling, mm 1,5-10 1,5-13 1,5-13
Maximum drilling diameter in wood, mm 20 25 25
Maximum drilling diameter in steel, mm 10 13 13
Maximum drilling diameter in concrete, mm 10 13 13
Reverse + + +
Impact mode + + +