Denyo DIS-390ES, Instruction Manual

Page: 27 / 67

24
3-5 Stopping
(1) Close air outlet valve(s). The speed regulator will reduce engine speed to the idle.
Put the machine in cooling operation for about 5 minutes.
(2) Turn the starter key to the "STOP" position. The engine stops and the compressed air
remaining in the compressor will be automatically discharged. Do not attempt to quickly
discharge it through the air outlet valve(s) or the start-run valve.
*** Note ***
Never discharge the compressed air through the start-run valve in cold weather; oil may
sometimes be mixed with the discharged air.
(3) The residual air will be discharged in about 90 to 120 seconds. Restart the engine
after confirming that the delivery pressure gauge reads zero.
3-6 Emergency stop and monitor display
The monitor indicates the following:
OIL PRESS.
WATER
TEMP.
CHARGE
DISCHARGE
AIR TEMP.
ENGINE
LOW
SPEED
Low engine lube
oil pressure
○ ○
High engine
Water temperature
○ ○
High discharge
air temperature
○ ○
Engine speed
abnormally
○ ○