A
CAUTION
Stacking
I Improper stacking o f machines may cause falling or dropping accidents.
W hen stacking other machines on this machine, be sure to observe the
following points.
* Check that the bonnet of the machine is free from damage
and that the fixing bolts are not loosened and missing.
* Put the machine horizontally on a solid foundation which withstands the weight of
stacked machines.
* Machines can be stacked up to 2 stages.
The weight and size of stacked machines should
be less than those of this machine.
* Using square timbers as shown right, put each
machine making sure that the weight is even.
□
c
□ c
'7/7777/7/77777/7/
///7 /7 7 7 ///
Do not operate the machines in the state of
stacking to prevent falling or dropping accidents.
A
CAUTION
HOT PARTS can burn skin.
1
High temperature units are located in the machine.
(Note that these units are very dangerous if they are
used incorrectly.)
* Be sure to close the door and lock it during operation.
* If the door needs to be opened during operation,
do not get your hands and head in the machine to
prevent unexpected bums.
* When making check or maintenance of the machine,
be sure to stop the machine.
* The bonnet is still hot even after the machine is
stopped.
Be careful until the engine is completely cooled.
~
7
-
