Denwa Communications Mitel 5603 User Manual Download

Page: 9 / 57

5603 Wireless Handset User Guide

Description of Your Handset

*System dependent feature

Earpiece speaker

Soft keys

The three soft keys is used with GUI, that is, the functions of each Soft key is indicated by text
in the display just above the keys.

Off-hook key

To answer a call, to pre-dial a number, and as a short cut to the Call list.

Voice mail access*

A quick access to the handset’s Voice mail.

Key lock and Upper/Lower case

Combined key lock and Upper/Lower Case.

Space

To add space between text.

Microphone

Sound off key

To turn on/off audible signals in idle mode, silencing the ring signal at incoming call, and to turn
the microphone on/off during a call.

Tactile indicators

There are two tactile indicators to indicate the centre of the key pad.

On-hook and On/Off key

Combined button; to end a call, to return to standby mode, and to switch the handset on/off by
long press.

Four-way navigation key

Navigation key with Left, Right, Up, and Down.

During a call, the keys Up and Down are used to increase and decrease the speaker volume,
respectively.

Display

The B/W display is 28 mm wide and 35 mm high with backlighting.

Headset connector

The headset connector is for connecting a headset. The connector is protected against dust by
using the headset connector cover.

LED

Indicates incoming call, messaging, low battery, and charging.

Summary of Contents for Mitel 5603


























































Search results

Summary of Contents for Mitel 5603

Reviews:

Related manuals for Mitel 5603

Brands by name

Popular brands

Denwa Communications Mitel 5603, User Manual

Search results

Summary of Contents for Mitel 5603

Reviews:

Related manuals for Mitel 5603

Brands by name

Popular brands