[Skriv her]
Specificatons
Clock control:
DCF77-radio signal
Time format:
12/24 h
Indoor temperature:
0 °C to +50 °C, 0,1 °C resolution
Outdoor temperature:
-40 °C to +60 °C, 0,1 °C resolution
Temperature measurement accuracy:
±1 °C for range 20 °C to 24 °C
±2 °C for range 0 °C to 20 °C and 24 °C to 40 °C
±3 °C for range -20 °C to 0 °C and 40 °C to 50 °C
Indoor and outdoor humidity:
25 - 90 % RH, 1 % resolution
Humidity measurement accuracy:
5 %
Barometric pressure measurement range:
850 hPa to 1050 hPa
Wind sensor measurement range:
0 to 127,5 km/h
Rain gauge sensor measurement range:
0 to 2.999 mm
Radio signal range:
Up to 50 m im free sight
Connected sensors:
Max. 3 temperature/humidity /Wind sensors
Max. 1 rain gauge sensor
Power supply
Main unit
3 x AAA-Batterien ( not included) and AC 230 V/DC 5 V, 300 Ma
adapter (included)
Rain gauge sensor
2 x AA batteries (not included)
Temperature/humidity/Wind sensor
4 x AA batteries (not included)
The buttons
Mode button
Set button
Clock button
Channel Button
Up/down buttons
Installation
Power and Batteries
Plug the power adaptor into the main unit and insert batteries (3 x1.5V AAA). Continue with inserting batteries
into the wireless temperature/humidity /wind sensor(4 x1.5V AA) and the wireless rain gauge
Sensor (2 x1.5V AA). The battery compartment of the rain gauge sensor is protected by screws, so you need a
suitable screwdriver. Low battery levels will be indicated on the display (see 15,32 and 38).
Backlight
The weather station display is backlit. When you press the Sleep/Light button (1), the display lights up for five
seconds. When the weather station is powered by the power supply, the backlight is always on. You can
reduce the brightness of the display in two stages by pressing the snooze/light button. A third press puts the
display into standby mode.
Connecting the units
Place all units next to each other. The main unit will automatically detect the signals from the sensors usually
within 3 minutes. If the main unit does not detect the signals press and hold the channel button on the main
