Denver TSP-503, User Manual

Page: 8 / 156

EN-6
- Press the "Source" Button and select
LINE,LINE will show on the RED LED
display.
- Plug in your 3.5mm cable into the LINE
Input on the side panel and the unit will
enter into LINE IN mode.
- You can connect any audio device that
has 3.5mm audio output jack and
playback any audio from the connected
device.
- Smartphones recharging works on
both AC power and DC power.
CAUTION: When the low battery
red indicator lights up, that means
product needs to be recharged and
smartphones recharging can only
be done by AC power adaptor.
- Plug in the Power AC Adaptor to the
wall outlet.
- Plug in your smart phones/tablets USB recharging cable into the side panel marked
"1A charger".
- Connect the recharging cable to your smart phones/tablets. Recharging starts.
- Unplug your USB recharging cable when your smart phones / tablets are fully
recharged.
This jack is only designed for charging devices requiring 5V and 1A.
Otherwise it may lead to damage.
-
This product allows you to sing-a-long with
the songs are playing either on BT, USB or
LINE IN mode and allow 2 microphones at
the same time.
-
Plug in your Microphone cable into the side
panel marked "MIC 1" and/or "MIC 2".
-
Adjust the MIC Volume "MIC + / MIC – " or
main volume on the top control panel.
-
Adjust the Echo level " EH + /EH – ".
-
Start to sing
-
SING-A-SONG
LINE IN
POWER
LINE IN DC JACK
USB 1A CHARGER
MIC 1
ON OFF
MIC 2
1
2
POWER
L INE IN DC JACK
USB 1 A CHARGER
MIC 1
ON OFF
MIC 2
POWER
LINE IN DC J ACK
USB 1A CHARGER
MIC 1
ON OFF
MIC 2
MIC - MIC +
EH + EH -
SMART PHONES/TABLETS RECHARGING