Denver TFD-3250DVBT, User Manual

Page: 20 / 32

18
System operation
System operation will define the setting of the set; these definitions will be stored until you change them again.
General Steps of Setup Menu
1. Pause or Stop the player. Press DVD-SETUP on the remote control. The main menu will be shown, as below.
2. Press the buttons to select the Icon of the desired section, e.g. “TV System" and press to open
that section.
3. Press
to select the desired feature and again press to open that section.
4. Press to select the desired feature and then press "OK" to select the new setting.
5 To exit the menu, press "DVD-SETUP" or to select EXIT SETUP and then press "OK" When launching the
setup routine, the pressing of the following buttons will turn off the setup menu, while the choices that have
been changed will be saved.
Menu specification
1. SYSTEM SETUP
The system setup options are illustrated below:
TV SYSTEM
According to the Colour system of your TV, normally this is set to either AUTO or PAL.
PASSWORD
The password option is initialized as locked. You cannot set the ratings limit or change the password. To enable
these features you must unlock the Password. The default password is "0000". Using the button, move the
highlight to "PASSWORD", press the button and enter "0000". You will see the padlock symbol open. You may
now change the RATING or put in a new password number.
If the Lock symbol is BLUE you must press the button to enter the lock field, the lock symbol will change to
YELLOW, you may now enter a new 4 digit number. Please remember or write down the new Password and
keep safe.
RATING
The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the family
watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection.
DVD Operation