TROUBLESHOOTING
TROUB LESHOOTING
If a problem occurs, check the points below before taking the apparatus in for repair.
Do not open the apparatus to prevent all risk of electrocution.
If you are unable to solve a problem using the indications provided below, contact your dealer or after-sales
service center.
WARNING:
Under no circumstances should you attempt to repair the apparatus yourself; doing so will void
the guarantee.
Problem
Solution
NO INFORMATION DISPLAYED ABOUT THE DISC
No CD in the player.
Insert a CD, CD-R or CD-RW in the player.
The CD is scratched or very dirty.
Replace/clean CD. See Maintenance.
The laser lens is covered with condensation.
Wait until condensation disappears from the
lens.
The CD-R is blank or the disc is not finalized.
Use a finalized CD-R.
THE CD IS NOT READ
The CD is scratched or very dirty.
Replace/clean CD. See Maintenance.
The laser lens is covered with condensation.
Wait until condensation disappears from the
lens.
THE CD SKIP TRACKS
The CD is scratched or dirty.
Replace/clean CD. See Maintenance.
A program sequence us activated.
Exit the programming mode(s).
NO SOUND/ELECTRIC POWER
The volume is not properly set.
Adjust the volume.
The electrical power cord is not plugged in
correctly.
Check the power cord connections.
The batteries are dead/not inserted correctly.
Check the installation and charge of the
batteries.
T H E D I S P L AY U N I T D O E S N O T F U N C T I O N
CORRECTLY/THE BUTTONS DO NOT FUNCTION
Electrostatic discharge.
Turn the unit off and disconnect it. Plug it back in
a few seconds later.
SPECIFICATIONS
ENG-10
(The technical characteristics are liable to change without notice)
Power supply
Power consumption
Dimensions of unit
Weight
Frequency range
Output power (RMS)
Speaker
Headphone
: AC 230V ~ 50Hz
: DC 12V 8 x UM-2/R14 batteries (not included)
: 14 Watts
: 257(L) x 200(W) x 118(H) mm
: 1.488 kgs
: AM 540 to 1600KHz
: FM 88 to 108MHz
: 2 x 1.2W RMS
: 8 Ohms
: ø 3.5mm
Instructions on environment protection
Do not dispose of this product in the usual household garbage at the end of its
lifecycle; hand it over at a collection point for the recycling of electrical and
electronic appliances. The symbol on the product, the instructions for use or
the packing will inform about the methods for disposal.
The materials are recyclable as mentioned in this marking. By recycling,
material recycling or other forms of re-utilization of old appliances, you are
making an important contribution to protect our environment.
Please inquire at the community administration for the authorized disposal
location.
