background image

9

loosen or damage the spring holding the fender.

As a result, the brake pad constantly touches the wheel and the motor temperature increases due to the
additional resistance. The rear tire can also get loose if the brake is in constant braking position.

Avoid constant braking. As a result, the tires will not only wear off, but also become hot. This will soften
the rubber and it will no longer have the same grip on the road as usual. Do not touch the tire after
braking.

If you hear unusual noises or notice friction when switching on the electric scooter, a bearing may be
damaged. A worn bearing may even be indicated by strong vibration of the handlebar. In this case,
please contact your retailer since the bearing needs to be replaced and/or the handlebar checked and
adjusted.

Ride the electric scooter only on a dry surface since otherwise the riding safety and braking performance
may be impaired and the motor or bearings may be damaged.

Please do not ride up or down long and steep slopes.

Stop riding when you receive the "Low Battery Warning". The electric scooter then moves only slowly
and does not have the same traction as normal and the electric brake does not work. In this case, please
use the rear brake to stop the electric scooter. Get off the Electric scooter as soon as the speed allows to
do that safely.

Do not use the electric brake and the throttle at the same time.

A normally working Electric scooter operates safely and quietly. If you hear noises or notice bumpy
operation, please check wheels, bearings, and brakes. Contact your customer service for repair and
maintenance, if necessary.

Maintenance

To ensure you get the best possible performance and experience from your electric scooter, it is

important to do regular maintenance for important parts of the product.

Battery maintenance

Bearings, Screws, Brakes and Wheels

Storage and Cleaning

Your electric scooter will require some maintenance so please read and familiarize yourself with this guide.

Battery maintenance

All batteries have a life cycle, and performance will decrease over time, however here are some advice to
maximize the life span of the battery.

Make sure that the battery is charged at regular intervals, even if you do not use the electric scooter for a long
time. This is to prevent damage to the battery, caused by low voltage over an extended period.

Avoid draining the battery completely. It is best to charge while there is still power on it. This will extend battery
life. If the battery is constantly depleted, it will damage the battery (damaged battery caused by wrong handling
are not covered by the warranty).

If riding the electric scooter in cold or very hot areas, the battery time can be lower than when riding in

Summary of Contents for SEL-80125F
























Reviews: