background image

21

Regarding Battery charging SEL-80125F

Important

Please read!

Dear customer. We hope you get a lot of joy out of your new Electric scooter.

The battery built in the Electric scooter is not fully charged from production line and when left unused
the battery can slowly discharge by itself.

This can lead to slow charge if the battery is fully discharged, but this is done to avoid damage to the
battery.

If you experience that you cannot turn on your E-scooter, and it doesn

t seem to charge (the charger

lights up green instantly), then please do the following.

1. Leave the charger in for 6-7 hours. This will make sure the battery will be fully charged again (it can

take 3-4 hours before it starts normal charging).

2. If this does not solve your problem, please ride the Electric scooter manually without turning it on.

Use your legs to give speed, for around 100 m, and then connect the charger. The engine in the front
wheel will this way help to activate the charging function and it will charge normally. (fully charge
takes 3 hours if using this way)

Please enter: www.denver-electronics.com to obtain the electronic version of the manual.

Summary of Contents for SEL-80125F
























Reviews: