Denver SCO-80130, User Manual

Page: 14 / 25

1) Front LED light
The scooter is equipped with a front LED light. Power on the scooter, then press and hold the button
▲
(speed up button) for 3 seconds to turn on the front LED light. Press and hold the button (speed up
▲
button) for 3 seconds again to turn off the front LED light.
2) Rear LED lamp
The scooter is equipped with a rear LED lamp. The rear LED lamp is powered by 2 AA batteries (not
included).
1) Detach the LED lamp from the scooter as indicated in the figure below.
2) As indicated in the figure below, open the LED housing by using a coin, and load 2 AA batteries
according to correct polarity, then close the housing.