6/62
The rider must pedal forward to obtain any assistance from the motor. This is an important safety feature.
This electric pedal assistance bikes will provide assistance up to 25 Km/h, after that the motor will cut out.
You may go faster but must do so under your own effort without the electric assistance.
To start the e-bike turn on the main switch on the side of the battery, the LCD on the handlebar panel will
light up. The motor will not work until you pedal a full revolution of the chain wheel. This feature protects
the motor and controller from damage and extends the service life of the electric components.
Contents
1. Structure of an electric assistance bike
2. Important safety cautions
3. Operation
4. Battery installation & usage.
5. LCD and function
6. Using and maintaining the battery
7. Using and maintaining the charger
8. Using and maintaining the motor.
9. Maintaining the controller.
10. Maintaining the power-off control of the brake lever
11.. Simple troubleshooting
12. Electric circuit diagram and specifications
13. Main technical specification sheet
1.
Structure of this E-BIKE (See part
Ⅰ
.Fig 1~1.1)
2.
Important safety cautions:
• We strongly advise wearing an approved helmet, which meets local standards.
•
Obey local road rules when riding on public roads.
•
Be aware of traffic conditions
•
The rider must be over 14 years old.
•
Have your bike serviced only by authorized bicycle shops.
•
Regular servicing will ensure a better and safe riding performance.
•
Do not exceed more than 100kg load on bicycle, including rider himself.
•
Never have more than one rider on the bicycle.
•
Ensure regular maintenance is carried
out on the bike according to this owner’s manual
• Do not open or attempt maintenance
on any electrical components yourself. Contact your local
bicycle specialist for qualified service and maintenance when needed.
•
Never jump, race, perform stunts or abuse your bicycle.
•
Never ride under the influence of intoxicating drugs or alcohol.
•
We strongly recommend using lights, when riding in the dark, fog or poor visibility.
•
When cleaning this bike, please wipe the surface with a piece of soft cloth. For very dirty areas you
can wipe it with a little neutral soap and water.
Warning:
do not wash this electric bike direct with spraying water especially pressure washers.
Avoid water entering electric components as this may result in damage of the electric components.
Summary of Contents for Orus E-POWER PRO X7M 27.5 E3700
