8
5.3 SPEED DISPLAY
It displays the current riding speed of e-bike. The speed display is as below.
5.4 KM/H & MPH
Hold "+" and "-" buttons for 2 seconds to enter into the mode of setting. Press MODE to choose setting parameters
(KM/H or MPH) and press "+" and "-" buttons to exit setup.
To reset the total mileage, press the "+" and "-" buttons for 5 seconds to display the following screens (Fig.
5.1) (Fig. 5.2).
Hold the "-" button to reset (Fig. 5.3).
Press again the "+" and "-" buttons for 5 seconds to return to the main screen (Fig 5.1).
(Fig. 5.1)
(Fig. 5.2)
(Fig. 5.3)
5.5 BACKLIGHT INDICATOR
With the power on, hold UP for 1.5 seconds and turn on the backlight. Click it again for 1.5 seconds and
turn off the backlight.
5.6 6 KM/H WORK
Hold DOWN for 3 seconds and enter into the mode of power assist walk.
The e-bike is traveling at 6Km/h. Display as shown.
5.7 ASSIST LEVEL SELECTION
Click
UP
or
DOWN
to change the stages and output power ratio, the
output power range from level 0 to level 6 for the default (the levels can
be customized by user), the default value is level 1.
5.8 ERROR CODE INDICATOR
If there is something wrong with the electronic control system, the display
will flash at 1 HZ and show the error code automatically. Different error
code is corresponding with different fault information, please see the last
page Error code table for details.
