6
(Fig.2)
(Fig.2.1)
(Fig.3)
Firstly, please put the battery case along this slider horizontally (as Fig 3), then push it into and ensure a
snug fit. Second, make sure the battery pack is firmly pushed into the controller housing and its connector
is securely inserted inside the controller box.
Notice the battery lock (Fig.4.1,4.2)
(Fig. 4.2)
From the initial position turn it to the right according to the arrow guide, then lock it.
On the contrary, you
can unlock it.
Battery charge
If an AC outlet is available within reach of your bike, you can charge your bike directly with the battery still
attached to the bike. The charging port is covered by a plastic cap, with a yellow arrow for notice (Fig. 4.3).
Please open it then you charge the battery directly (Fig. 4.4).
Removing the battery is useful for charging in a location where the bicycle may not fit or when no
reachable AC power supply exists at the place where the bike is parked
Before removing the battery from the bike, you need to do as following steps:
* make sure the switch is off, the button is returned back (Fig. 4.5).
(Fig4.1)
