3
We recommend using a helmet during use
Comply with the highway code
Be aware of traffic conditions
Frequent controls allow for better and safer use
Do not exceed a100kg load on the bicycle, including the cyclist
Never ride the bicycle with more than one person at a time
Make sure maintenance is carried out according to the instruction manual
Maintenance of the electrical components must be carried out by qualified staff. Contact your retailer if necessary
Do not jump. Compete, do acrobatics or other similar activities with the bicycle
Never ride the bike under the influence of drugs or alcohol
Use a soft cloth to clean the surface of the bicycle. For particularly soiled areas, clean with a small amount of mild soap and water. PLEASE
NOTE: do not wash the bicycle directly with jets of water, especially pressure pumps, as it could damage the electrical components.
3
–
Operations prior to use
Your new pedal assisted electric bicycle is a transport means equipped with a li-ion battery, high quality hub motor and a control unit with an
electric pedal assisted system to aid normal pedalling. The above-mentioned equipment assures safe steering with excellent performance. It is
important to note the following guidelines for the best possible experience with this bicycle.
-Make sure the tyres are fully inflated as indicated on the covers.
-Recharge the battery before each use
-Periodically apply oil onto the chain to keep it clean
4
–
Battery installation and function
FIG 2
The battery of the electric bicycle is located inside the rear frame (see fig 2)
To remove the battery you must firstly remove the saddle as illustrated in fig 3
FIG 3
The battery has a lock, which prevents sudden changes during use and especially prevents theft as illustrated in fig 4
FIG 4
5
–
DISPLAY functions
