EN-3
1.
Press the “ Play/Pause
” button (21) to pause playback, the current track number will flash on display.
2.
Press the “ Play/Pause
” button (21) again to resume normal playback.
Stop mode
1.
If “ Stop
” button (8) is pressed during play or pause mode, system will go to stop mode.
Skip mode (skip up
/skip down
)
1.
During play or pause mode, if “ skip up
” button (25) is pressed it will go to next track and display the track no. and then
remain the play or pause mode.
2.
During play or pause mode, if “ skip down
” button (12) is pressed. It will go back to the beginning of the track, original track
no. is display and remain the play or pause mode.
3.
After step 2, press “ skip down
” button (12) again, it will go to the previous track and remain the play or pause mode.
Search mode (search up
/search down
)
1.
During play mode, if “ skip up
” button (25) is pressed & hold for few seconds, it will start searching forward.
2.
During play mode, if “ skip down
” button (12) is pressed & hold for few seconds. It will star searching backwards.
Repeat mode
Press the Repeat button before or during playback, a single track or all the tracks can be played in difference mode as follow:-
For CD
(1) Repeat 1
(2) Repeat all track
(3) off mode
Indicator
Play mode
on LCD display
Repeat track
Flash on display
Repeat all
Show on display
Off mode
--------------
Random mode
1.
Press Random button (9), you can listen all the tracks in random order by this function
CD disc programming
Up to 20 tracks can be programmed for CD and play in any order. Before use, be sure the system is at stop mode before
programming :-
1.
Set in CD mode & stop the CD playback.
2.
Press the “ Mem/Clk-adj ” button, “ MEM ” icon and track no. will flash on LCD display (2). Moreover, it will indicate program no. to
be programmed.
3.
Select a desired track by pressing skip up
or down
buttons (25,12).
4.
Press the “ Program ” button to store the trace into memory.
5.
Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6.
When all the desired tracks have been programmed, press CD “ Play/Pause
” button (21) to play the disc in assigned order.
7.
To cancel the programmed file, press “ stop
” button (8) until “ MEM ” is disappear on LCD display (2)
Listing to tape
General operation
Stop / eject key
Press to stop all deck operation. Press again to open the cassette door.
Fast forward key &
Press to start rapid tape winding in either forward or revers
Fast rewind key
direction. Press stop / fast rewind key eject keys when the cassette spools stop turning.
Play key
Press to start playing tape.
Pause key
Press to stop tape operation temporarily. Press again to resume play.
Record key
Press together with play key to start tape recording.
(deck 1 only)
Playback
Press Function button (10) to select
“ Tape ” mode.
Put in the cassette tape.
Press Play key
to active playback
Adjust the Volume up/down control (3) to the desired level.
Use Pause key
when you want to stop playback temporarily.
Press Stop / Eject key
when finished.
Notes:
It is possible to play a cassette in both ca
ssette players, one after the other. If you press the “Pause” and “Play” buttons together at
deck 1 and then the “play” button at deck 2, the tape in deck 1 will start player automatically after the tape in deck 2 has finished
playing.